Skip to content
Title card reading Artificial Christmas Garlands: Why Tip Count Matters More Than Length

Artificial Christmas Garlands: Why Tip Count Matters More Than Length

Two garlands, both 275cm, both sold as evergreen. One carries 110 tips. The other carries 368. Hung side by side on the same banister they do not look like the same product, and only one of them is doing what the customer pictured when they signed off the quote.

That is the whole problem with buying garland on length.

Length tells you where it goes, tips tell you what it looks like

Length is a fitting measurement. It answers one question, which is whether the thing reaches.

Tip count is the one that decides the job. It is how thick the garland is and how much it covers, and it moves far more than people expect. Across our eight 275cm garlands the counts run 110, 140, 140, 150, 180, 210, 368 and 368. The densest carries more than three times the tips of the lightest at exactly the same length and for the same run of handrail.

So when you are quoting from a spec sheet, quote the tips.

The number worth working out

Divide tips by length and you have coverage per centimetre. Across that 275cm group it runs from 0.4 to 1.34.

At the low end you see plenty of what is underneath. On a bare metal handrail that reads as sparse. On a staircase where the garland is one layer under ribbon, cones and lights, it reads as fine, and you have not paid for density you were going to bury anyway.

At the high end it covers on its own, which is what you want on anything seen close up or anything you are not dressing further.

Neither is better. They are different jobs. The figure just tells you which one you are holding.

It is also where the money goes. Within the same range at the same length, stepping up thirty tips moves the price, and the densest lines sit near the top of the band. Work out whether the density is doing visible work in your brief before you pay for it.

Pine, spruce, cedar or berry

Nobody picks between these on performance. They are artificial foliage on a wire core and they all do the same mechanical job. The choice is look and texture, what else is going into the scheme, and what it costs. That is a shorter conversation than most suppliers would like it to be.

Where it matters is that the groups are not interchangeable on specification.

Pine and spruce is where the density range lives. Every one of our eight 275cm garlands is pine or spruce, and it is the only group that gives you a published tip count to work from. If the brief needs a long run with a specified density, you are choosing inside this group whether you like the look or not.

Cedar sits at 182cm with a narrower set of options. Mantel and door surround work rather than staircases.

Cotton and eucalyptus is a single line rather than a group, also at 182cm. In green and white it is the coolest thing in the range, which makes it the one to pull out when the brief is a winter wedding or a January event rather than a red and green Christmas scheme.

Berry and cone mixes arrive already dressed. Forest berry and pine cone, country cones and cinnamon, magnolia and pinecone, and a plain red berry at 300cm. The appeal is the time saved, not a narrower choice: the dressing is done for you and you can still build on them the same as any other base, so they suit a week where the installs are stacked up and nobody has the hours.

Decorative garlands are not foliage and are not a base. Glittered twig at 130cm in three colours, pearl rose on 5m rolls, jewel garlands on 1m rolls. They go over and alongside, and they sit at an entirely different price level from the festive foliage, which is what makes a dressed lighter base a genuine alternative to a dense garland on cost.

If you are combining any of these with artificial Christmas flowers, settle the garland first and add florals last. It is much easier to judge how much floral material a run actually needs once the base is up.

Lengths, and what actually fits

Twelve of ours sit at 180cm or 182cm, which is mantel and door surround territory. Eight sit at 275cm, where staircases, banisters and window runs start.

Then the outliers: glittered twig at 130cm, ivy at 150cm, stephanotis at 175cm, grape ivy at 200cm and again at 2.5m, a red berry at 300cm, pearl rose on 5m rolls and jewel garlands on 1m rolls.

Measure the path, not the span. A garland follows the handrail rather than the straight line between the posts, swags between its fixing points, and drops at each end. Then there is the overlap where two meet. Run a tape along the route the garland will actually take, let it dip where you want it to dip, add the drops, and convert that into units afterwards.

Under-ordering is the obvious failure here, though in practice we see less of it than you would expect. It is the tip count that catches people out.

Four jobs, four different problems

The same garland behaves differently depending on what it is fixed to, and the constraint changes with it.

Mantel. Fixed at both ends, viewed from the front and slightly below, with nothing behind it to fill a gap. Density earns its money here more than anywhere, because there is no depth to hide a thin patch in.

Staircase. The longest continuous run you will do, and the one where the path measurement matters most. Multiple fixing points, overlaps between lengths, and a drop at the bottom post that always takes more than people allow for.

Top table. Seen from the front by everyone seated and from above by everyone standing, which is two sightlines rather than one. The weight hangs off a table edge, so this is where loading it up goes wrong fastest.

Arch and frame. The garland is carrying its own weight vertically, so anything you add pulls down rather than sits on top. Fewest places to hide a fixing, so plan them before you start rather than finding them as you go.

Across all four, the failure is almost never the garland. It is what went on it. Load it with cones, baubles and ribbon and it will sag between its fixings, and the heavier it gets the more fixing points it wants. Settle that on the bench rather than halfway up a ladder with the thing already hung.

Scale bows to the garland rather than to the room. For anything sitting on top of foliage use wired ribbon, because wire down both edges is what holds the loops open with nothing behind them. The guide to choosing wholesale ribbon covers the widths.

Lit or unlit

Two of the thirty three are lit: the Blue Spruce at 368 tips and an Evergreen Mountain at 140. Both carry 100 LEDs and both run on 3 x AA.

The batteries are the point rather than the lights. No cable run, no decision about where the cable hides, no extension lead taped across a doorway. That makes these the two to reach for outside, and on gates, porches and window displays where there is no plug or nowhere sensible to run one from.

They also take out the step of threading a separate set through the tips, which on a dense garland is not a five minute job and is harder to make look tidy than people expect.

When the one you wanted has gone

Seasonal lines run down, and the point at which you need to reorder is rarely the point at which you specced the job. So you end up matching rather than repeating.

Match on tips and length, not on name. Two garlands sharing a name and carrying different tip counts are different products, which is the whole of the first half of this article. Two with different names, the same length and the same tip count will drop into the same job and nobody will pick it up in the photographs.

Work out the coverage figure of the one you had, then find the closest number to it in what is still available. If nothing lands near, take the lighter garland and dress it up to close the gap rather than hoping the difference goes unnoticed. It will not.

The buying calendar

Trade customers start preparing for Christmas garland in September, and a good number of them earlier than that. Which means the people who get first pick of the dense lines are the ones who decided in summer what they were going to need.

If you are reading this in season, that is a note for next year rather than a useful instruction now. What is useful now is knowing which of these are not seasonal at all.

Eight of the thirty three carry no Christmas reference anywhere in their copy: both ivy garlands, the green grape ivy, lambs ear and pumpkin, rustic meadow sedum, stephanotis, and pearl rose in cream and white. For florists, event stylists and venue dressers working year round, those are the ones earning their shelf space in February. The green grape ivy is listed as coming soon.

The rest sit with the artificial Christmas garlands, the Christmas wreaths and the festive foliage.

How many to buy

One first. Get it in your hands, see what the tip count actually looks like, then order what the job needs.

That sounds obvious until you are committing to a staircase from a photograph. Across the 275cm range especially, where the same length covers such different amounts, the sample is the cheapest decision you will make all season.

Previous article Artificial Flower Stems: How to Judge Quality Before You Order
Next article Choosing Wholesale Ribbon: Type, Width and Roll Length