Skip to content
Rolls of wholesale ribbon in burgundy, gold, navy and black velvet with red satin and jute, on a plain background

Choosing Wholesale Ribbon: Type, Width and Roll Length

Most ribbon gets ordered on autopilot. Same colours as last year, same widths, roughly the same quantities. It usually works. Then a wreath order lands at twice the size you quoted for, or a bride picks the one burgundy you have four metres of, and you find out which of those decisions were judgement and which were habit.

Worth a think before the Christmas run, then.

Wired or not

Wire down both selvedges means a bow holds its shape with nothing behind it. That is the whole job. A wreath bow sitting proud of the foliage, a loop on an arch seen from below, anything that has to look deliberate from two metres away: wired.

Everything else is better unwired. Unwired drapes, trails and ties flat, and it does not fight you when you are wrapping a binding point.

Our wired range is 38mm velvet. If a brief needs wired in something else, say so early rather than at the ordering stage, because it is not a shelf item.

The fabrics

Satin is the one you will get through. We carry it from 3mm up to 50mm on 20m and 50m rolls, which is the widest spread of anything in the range, and double faced means no wrong side when a bow twists. The narrow end, 3mm and 6mm, is buttonhole and corsage territory. 25mm and 38mm cover most bouquet work. 50mm is for when the bow is the feature.

Velvet is the Christmas one. 12mm through to 50mm, on 10m rolls rather than 20m, so order it by the job and not by the year. It sits well against pine and dried botanicals, and it is the fabric customers notice.

Organza in our range is the 40cm sewn-edge width, which is a chair sash and a table runner rather than a bow ribbon. Different job entirely. If you want sheer on a corsage you are looking at a narrow satin in a pale shade instead.

Jute, 15cm wide, is the rustic base layer. Underneath a velvet bow it does a lot of work for very little money.

Lace is two widths, 3cm and 15cm, in cream and white. Over satin it gives you the vintage register for wedding work. That is the extent of it, so do not build a whole range around it.

Width is where orders go wrong

More ribbon gets ordered in the wrong width than the wrong colour. The fabric is usually right. The proportion is off.

The test that works: hold the ribbon against the finished piece, not against the bench. A 38mm bow looks generous on a wreath and ridiculous on a wrist corsage. On corsage work especially, check the ribbon against your actual bracelet and snap band bases before you commit to a roll, because the base sets the proportion and they vary.

Hand-tied bouquets want body more than width. If the bow collapses as soon as you let go, the fabric is too soft for the width you have chosen.

What to check before you buy a case of it

Ask for a length before you commit, and do three things with it.

Run your thumbnail along the cut edge. If it frays while you are looking at it, every cut your team makes will need sealing, and that is time you did not price for.

Tie a bow with it. Not a neat one, just a working bow at the width you will actually use. Some ribbon settles into the knot and some fights it, and you cannot tell which by looking at a roll. If you are fighting it on the sample you will be fighting it on all forty.

On wired, feel along the edge for the wire bunching. It should run true. A wire that kinks will put a dog-leg in every bow.

Working out how much you need

Ribbon is the material most people underorder, because it gets treated as a sundry rather than a component. Put it in the costing as a line of its own and the problem mostly goes away.

Work from one finished piece. Make it, measure what you used including the waste, then multiply. Add a buffer on top, and set that buffer from your own records rather than a number off the internet, because it depends entirely on how tidily your team cuts.

For wreaths, settle the bow before you order. A single-loop bow and a six-loop bow are not in the same bracket, and if that decision is still open then your quantity is a guess.

One that catches people out: order a whole brief from one batch. Two rolls of nominally the same colour from different batches can read differently under venue lighting, and it is unmistakable in the photographs. If you are doing forty centrepieces and eight corsages in one palette, buy the ribbon in one go. The ribbon and lace collection is where to start.

Layering

Lace over satin, jute under velvet, a little decorative wire. The rule is to decide which material is doing the decorative work and make the others support it. Two materials competing reads as indecision.

If you are producing a run of matched product, write the ribbon spec down. Fabric, width, colour, length per unit. It sounds fussy for a bow until the week before Christmas when three people are making the same wreath and you need all thirty to look like each other.

For seasonal ranges built on willow and grapevine wreath bases, or the Christmas wreaths and artificial Christmas garlands, pick the ribbon at the same time as the base. Doing it afterwards is how you end up with a burgundy that fights the foliage.

None of this takes long. It is twenty minutes with a notepad before you place the order, against a season of substituting on the fly because the one you wanted ran out in week two.

Previous article Artificial Christmas Garlands: Why Tip Count Matters More Than Length
Next article Stocking Flower Girl Accessories: A Buying Guide for Florists