Skip to content
Dressing a Top Table with Artificial Garlands

Dressing a Top Table with Artificial Garlands

The top table gets photographed more than anything else in the room, and it is almost never the length you were told it would be. The brief says top table. You quote on three and a half metres. You arrive and it is four and a bit, because the venue has pushed another trestle on the end for the best man's family.

Most of what goes wrong with a top table is decided before you leave the workshop.

Measure the table, not the brief

Ask the venue for the actual run, and ask whether it is one table or several pushed together. Both answers change what you carry.

The usual pattern for this job is two or three 180cm garlands run end to end rather than one long piece. Twelve of ours sit at 180cm or 182cm, which is why that length exists. Shorter sections are easier to carry and easier to fix, and they will meet somewhere along the table, so it is worth knowing where before you are standing in front of it.

Two sightlines, not one

A mantel is seen from the front. A top table is seen from the front by everyone sitting at it, and from above by everyone standing up with a drink.

That second view is the one people forget. Foliage that reads well head on can look thin from above, because you are looking down into the mechanics: the wire spine, the fixings, the table linen between the stems.

So dress the top as well as the front. Fill the centre line where the spine shows. Keep anything structural under the foliage rather than behind it, because behind only works for one of the two sightlines.

Weight hangs off an edge

On a mantel the garland sits on a shelf. On a top table it hangs over an edge, so everything you add to it pulls down and forward rather than pressing into something solid.

Settle the loading on the bench, not at the venue. The heavier the dressing, the more fixing points the garland wants, and a top table gives you fewer places to put them than a staircase does. Most venues will not let you pin, tape or screw into their furniture, so you are working with the table edge, the linen and whatever you have brought with you.

Build the weight into the garland rather than hanging it off the garland. A heavy element wired to the spine behaves very differently from the same element hooked onto the foliage.

Flames, and what the venue will allow

More venues are banning naked flames every year. Confirm it at quote stage rather than on the day, because it changes what you carry and what you charge for.

LED is the practical answer. We hold LED wax taper candles in ivory with a 3D flame, in 25cm and 30cm, two to a pack. At 2cm diameter they drop into a standard candlestick, so the table setting does not have to change to accommodate them.

Top table alone, or the whole room

Whether a customer dresses the top table on its own or carries the scheme through the room usually comes down to budget rather than taste.

Worth settling early, because it changes the quote. A standalone top table and a top table that is one line on a twelve table order are not the same job.

Choosing the garland itself

Length tells you whether it reaches. Tip count tells you what it looks like once it gets there, and it varies far more than people expect. The guide to reading a garland specification covers how to work that out.

For a top table, lean denser than you would for a staircase. A staircase garland is seen from across a hall and usually sits under ribbon and other dressing. A top table is seen from a metre away by people who are sitting in front of it for three hours.

If you are finishing with bows, wired ribbon holds its shape with nothing behind it, which matters on a run where the bow sits proud of the foliage. The ribbon guide covers the widths.

Four things to confirm before you quote

The real length of the table, and whether it is one piece or several. Whether naked flames are allowed. What you are permitted to fix to. What time you can get in, and whether the room will be laid when you arrive.

None of those are interesting and all four change your price. The garland range is where to start once you have the answers.

Previous article How to Use Pampas Grass in Wedding and Event Styling
Next article The Perfect Backdrop for Your Big Day: Faux Grass Walls and Corsage Creations